|
|
- BEST SELLER!
- LO-DISC DESIGN
- 3/4" diameter raised circular pattern with lower raised discs for easy cleaning
- Ever popular, economical with 3/16" thickness at wear area (lighter gauge) for lighter traffic stairways
- 12 1/4" depth, 1 1/2" square nose.
- Six standard lengths.
- View Series I, II & III colors.
- For Grit Strip design go to Rubber Stair Tread Grit-Strip Section
- Order installation adhesive below.
Retail Price:$53.60 Our Price:$44.75 |
|
|
- DIAMOND PATTERN DESIGN
- 6" deep diamond design pattern.
- 1/4" thickness at wear area(medium gauge)
- 12 1/4" depth, Square or round nose with a longer 1 1/2" deep adjustable nose to fit pan filled, molded concrete or terrazzo steps.
- Six standard lengths.
- View Series I colors.
- For Grit Strip design go to Rubber Stair Tread Grit-Strip Section
- Order installation adhesive below.
Retail Price:$57.90 Our Price:$47.00 |
|
|
- RECTANGULAR PATTERN DESIGN
- Rectangular block design pattern.
- 5/16" thick at wear area; our heaviest gauge tread.
- 12 1/2" depth, slight return angle, 1 1/8" deep nosing insures better fit
- Six standard lengths.View Series I & II colors.
- For Grit Strip design go to Rubber Stair Tread Grit-Strip Section
- Order installation adhesive below.
Retail Price:$77.00 Our Price:$63.00 |
|
|
- DIAMOND PATTERN DESIGN
- Diamond design surface pattern.
- Extra long 2" deep nose adjusts and adheres to steps with a return angle between 90 and 60 degrees
- 3/16" thickness at wear area (medium gauge) tread
- 12 1/4" depth
- Six standard lengths.
- View Series I & II colors.
- For Grit Strip design go to Rubber Stair Tread Grit-Strip Section
- Order installation adhesive below.
Retail Price:$61.50 Our Price:$49.50 |
|
| - DIAMOND PATTERN DESIGN
- Excellent for exterior applications
- Made from 100% recycled tires
- Available in black color only,
- 1/4" thick (medium gauge)tread
- 12" depth, 3" smooth back border, 1-1/2" square nose pattern,
- Order installation #775 epoxy adhesive below.
Retail Price:$81.40 Our Price:$65.00 |
|
|
- HORIZONTAL BAR PATTERN DESIGN
- Square nose tread is 12" deep; Round nose is 11-5/8" deep.
- 1/4" thickness at wear area (medium duty).
- Square nose lip is 1 3/16" high. Round nose lip is 1 1/8" high but expands for better fit
- View Series I & II colors.
- For Grit Strip design go to Rubber Stair Tread Grit-Strip Section
- Order installation adhesive below.
Retail Price:$58.80 Our Price:$48.00 |
|
|
- RAISED DISC PATTERN DESIGN
- Durable for heavy traffic
- 3/4" diameter raised circular pattern.
- Meets ASTM-E84 Flame Spreading Rating of 25 or less.
- 1/4" thickness at wear area (medium gauge) tread
- 12 1/2" depth
- extra 1 7/8" deep nose adjusts and adheres to steps with a return angle between 90 and 60 degrees
- Six standard lengths.
- View Series III colors.
- For Grit Strip design go to Flame Resistant DISC-O-TRED Section
- Order installation adhesive below.
Retail Price:$68.30 Our Price:$56.25 |
|
|
- Available in disc pattern with tapered 1.08" discs raised 0.02".
- 5/32" thick, 19-3/4" deep, smooth rear border/riser is 11" deep, square nose only, 1-3/4" deep inside nose.
- These products do not contain any PVC, plasticizers etc. See Specs.
- Seven standard lengths.
- View Series I & III colors.
- #900 come without any grit strips. #GS900 has two 3/4" Grit Strips or #GS900VI has one 2" Grit Strip.
Call to order.
- Choose adhesives below (use #110 Epoxy Nose Caulk for longer wear and added safety).
Retail Price:$85.40 Our Price:$63.50 |
|
|
| - Molded 1/8" thick, 7" high coved stair risers.
- 5/8" toe fits flush on top of treads for easier cleaning
- Trim to fit in height and length.
- 6 standard lengths
- Available in marble and solid colors.
- View Series I, II & III colors.
- Order installation adhesive below.
Retail Price:$38.25 Our Price:$35.00 |
|
| - Smooth surface flat riser material
- Matches all treads except 787 Disc-O-Tread
- 1/8" thick by 6,7,8,9,10,12,36" high
- Covers any riser
- Also can add to top of riser to make higher or to back of stair tread to make deeper.
- Sold by the foot up to 75 feet length
- Sold in cuts 8 feet & under, and in cuts over 8 feet.
- View Series I & II colors.
- Order installation adhesive below.
Retail Price:$6.75 Our Price:$6.25 |
|
|
- Environmentally friendly.
- Recommended for all Stair tread installations, particularly rubber treads.
- Necessary when installing Adjusta-Nose treads or when the step nosing is broken, worn or rounded.
- Fills voids at the nose of the step and gives needed support underneath the stair tread nose.
- Quart of 2 part caulk mixes to cover 75 lin. ft. of 1/4" bead.
- Dual-catridge unit mixes in nozzle; covers 50 lin. ft. of 1/4" bead. Must be used with standard or deluxe dispenser.
Retail Price:$44.40 Our Price:$33.30 |
|
|
- A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble.
- One gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 4 gallon containers.
Retail Price:$30.80 Our Price:$23.10 |
|
|
- Bonds all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps.
- Rapid drying, long range contact cement.
- Contains solvents, extremely flammable.
- 1 gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 4 gallon containers.
Retail Price:$31.00 Our Price:$23.30 |
|
|
- Environmentally Friendly
- For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors.
- Not recommended where excessive moisture exists
- 1 gallon or 4 gallon cans.
- Covers 150 square feet per gallon.
Retail Price:$50.00 Our Price:$37.50 |
|
| - Two part environmentally friendly
- Recommended for Disc-O-Tile & Disc-O-Treads.
- May be used with other rubber stair treads, tile and flooring.
- Each unit contains a Part "A" & Part "B" packed in 1 gallon cans to be mixed to produce 1 gallon of adhesive
- Each unit covers approximately 150 square feet per unit.
Retail Price:$134.40 Our Price:$100.80 |
|