| Low Profile Disc Design Specs
- Length: 36" to 72"
- Depth: 12-1/2" nominal from inside of nose
- Thickness: 3/16" tapering to 1/8" nominal
- Nose length: 1-9/16" nominal
- Nose Thickness: 9/64"
- Tapered Nose: No
- Adjustable Nose: No
Retail Price:$69.00 Our Price:$62.00 Each |
|
| GS620D, GS620DVI Round Nose Rubber Stair Tread Specs:
- Length: 36" to 108"
- Depth : 12-1/16" nominal from inside of nose
- Thickness : 3/16" tapering to 1/8"
- Nose length: 1-9/16"
- Nose Thickness: 1/8"
- Tapered Nose: Yes
- Adjustable Nose: Yes
Retail Price:$68.25 Our Price:$60.00 Each |
|
| Retail Price:$68.25 Our Price:$60.00 Each |
|
| Raised Square Design Specs
- Length: 36" to 108"
- Depth: 12 - 5/16" nominal from inside of nose.
- Thickness: 1/4" tapering to 1/8"
- Nose Length: 1 - 9/16"
- Nose Thickness: 1/4"
- Tapered Nose: No
- Adjustable Nose: No
Retail Price:$87.35 Our Price:$74.00 Each |
|
| Raised Disc Design Treads with Grit Strip Specs
- Length: 36" to 108"
- Depth: 12 - 1/16" nominal from inside of nose
- Thickness: 3/16" tapering to 1/8"
- Nose length: 1 - 9/16"
- Nose Thickness: 1/8"
- Tapered Nose: Yes
- Adjustable Nose: Yes
Retail Price:$87.30 Our Price:$71.25 Each |
|
|
- Molded 1/8" thick, 7" high coved stair risers.
- 5/8" toe fits flush on top of treads for easier cleaning
- Trim to fit in height and length.
- 6 standard lengths
- Available in marble and solid colors.
- Order installation adhesive
Retail Price:$38.25 Our Price:$35.00 Each |
|
|
- Environmentally friendly.
- Recommended for all Stair tread installations, particularly rubber treads.
- Necessary when installing Adjusta-Nose treads or when the step nosing is broken, worn or rounded.
- Fills voids at the nose of the step and gives needed support underneath the stair tread nose.
- Quart of 2 part caulk mixes to cover 75 lin. ft. of 1/4" bead.
- Dual-catridge unit mixes in nozzle; covers 50 lin. ft. of 1/4" bead. Must be used with standard or deluxe dispenser.
Retail Price:$49.00 Our Price:$42.00 110 Epoxy Stair Nose Caulk |
|
|
- A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble.
- One gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 4 gallon containers.
- Call for price on 4 gallon containers.
Retail Price:$50.00 Our Price:$40.00 |
|
|
- Bonds all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps.
- Rapid drying, long range contact cement.
- Contains solvents, extremely flammable.
- 1 gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 5 gallon containers.
- Call for pricing on 5 gallon containers
Retail Price:$31.00 Our Price:$25.00 |
|
|
- Environmentally Friendly
- For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors.
- Not recommended where excessive moisture exists
- 1 gallon or 4 gallon cans.
- Covers 150 square feet per gallon.
- Please call for price on 4 gallons
Retail Price:$95.00 Our Price:$65.00 |
|
|
| - Two component urethane enhanced wet-set epoxy adhesive
- Contains Part A gallon container and Part B quart container to empty into Part A for mixing
- Covers approximately 125 square feet per unit
- Low odor, non-flammable, and solvent-free
- PLEASE NOTE ADHESIVE IS NOT RETURNABLE - See Specs
|
|