We will be closed Friday May 23 and Monday May 26 for Memorial Day

GSA2N, GSA4N Grit Surface Aluminum Step Nosing

GSA2N, GSA4N Grit Surface Aluminum Step Nosing
Click to Enlarge
Item#GSAN
Retail Price:$35.00
Our Price:$34.00 Each
Select depth & length:
Select insert color:
black gs
brown gs
blue gs
gray gs
green gs
red gs
yellow gs
Countersunk holes to install with screws?:
−+
Total Price:

Product Description

  • This 2-1/2” deep nosing is made from the same material as our Grit-Surface Aluminum Treads.
  • The GSA2N front abrasive edge is 1-3/4” deep with a 3/4" back edge and 1 1/4" deep nose.
  • Both the nose and tapered edge have a 1/4" wide reflective yellow tape strip for additional safety.
  • The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow.
  • Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12 inches.
  • Product lead time may be up to 4 weeks; so please call to expedite.

SPECIFICATIONS:

  • Furnish and install Musson Grit-Surface aluminum stair treads 3/16" thick, 7-1/2" (GSA75), 9" (GSA9) or 11" (GSA11) deep.
  • Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nose stair tread.
  • The front grit surface of the tread shall be in _______ color; the back surface shall be in _______ color
  • Colors to be separated by an aluminum rib.
  • Select colors from standard grit colors of black, brown, blue, gray, green, red or yellow.
  • Treads can be supplied with two countersunk holes every 12" for screw down installation, or without holes
  • Installation with #400 Neoprene Contact Cement.

MAINTENANCE:

The treads should be swept regularly to remove dirt. When necessary, the treads can be cleaned with a mild detergent and warm water solution. Treads can be lightly scrubbed with a brush and then rinsed with water. Consult with the factory on any stains that cannot be removed with this method.