|
- RAISED DISC PATTERN DESIGN
- Durable for heavy traffic
- 3/4" diameter raised circular pattern.
- Meets ASTM-E84 Flame Spreading Rating of 25 or less.
- 1/4" thickness at wear area (medium gauge) tread
- 12 1/2" depth
- extra 1 7/8" deep nose adjusts and adheres to steps with a return angle between 90 and 60 degrees
- Six standard lengths.
- View Series III colors.
- For Grit Strip design go to Flame Resistant DISC-O-TRED Section
- Order installation adhesive below.
Retail Price:$68.30 Our Price:$50.25 |
|
| - 3/4" diameter raised circular pattern.
- Meets ASTM-E84 Flame Spreading Rating of 25 or less.
- 12 1/2" depth, 1/4" thickness at wear area (medium gauge) tread
- extra 1 7/8" deep nose adjusts and adheres to steps with a return angle between 90 and 60 degrees
- durable for heavy traffic
- View Series III colors.
- Six standard lengths.
- Two 3/4" black Grit-Strips or 1 2" Grit-Strip are recessed 1" from front edge
- Grit-Strip inserts available in black, saftey yellow(shown), safety red, gray, brown or beige.
- Order installation adhesive below.
Retail Price:$78.70 Our Price:$55.10 |
|
|
- Smooth surface flat riser material
- 1/8" thick by 6,7,8,9,10,12,36" high
- Covers any riser
- Also can add to top of riser to make higher or to back of stair tread to make deeper.
- Sold in cuts 8 feet & under, and in cuts over 8 feet.
- Meets ASTM-E84 Flame Spreading Rating of 25 or less.
- View Series III colors.
- Order installation adhesive Musson No. 400 Neoprene Contact Cement, or No. 300 Water-based Contact Cement below.
Retail Price:$7.00 Our Price:$4.90 |
|
|
- 3/16" thick tile.
- This unique floor tile with raised circular discs (3/4" diameter), for better traction.
- Is attractive, non-staining and non-discoloring.
- Factory cut 24" x 24" square tiles mean quick installation, fewer joints.
- Circular discs allow for easy cleaning.
- Wheeled equipment moves across easily.
- Meets Federal Specs RR-T-650E. Shall have a Flame Spread Rating of 25 or less using ASTM-E-84 Test. See Specs.
- View Series III colors.
- Install with No. 775 Epoxy Adhesive. Order installation adhesive below.
Retail Price:$77.80 Our Price:$58.35 |
|
|
|
- Environmentally friendly.
- Recommended for all Stair tread installations, particularly rubber treads.
- Necessary when installing Adjusta-Nose treads or when the step nosing is broken, worn or rounded.
- Fills voids at the nose of the step and gives needed support underneath the stair tread nose.
- Quart of 2 part caulk mixes to cover 75 lin. ft. of 1/4" bead.
- Dual-catridge unit mixes in nozzle; covers 50 lin. ft. of 1/4" bead. Must be used with standard or deluxe dispenser.
Retail Price:$44.40 Our Price:$33.30 |
|
|
- A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble.
- One gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 4 gallon containers.
Retail Price:$30.80 Our Price:$23.10 |
|
|
- Bonds all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps.
- Rapid drying, long range contact cement.
- Contains solvents, extremely flammable.
- 1 gallon covers 75 lineal feet of stair treads
- 1 quart, 1 gallon and 4 gallon containers.
Retail Price:$31.00 Our Price:$23.30 |
|
| - Two part environmentally friendly
- Recommended for Disc-O-Tile & Disc-O-Treads.
- May be used with other rubber stair treads, tile and flooring.
- Each unit contains a Part "A" & Part "B" packed in 1 gallon cans to be mixed to produce 1 gallon of adhesive
- Each unit covers approximately 150 square feet per unit.
Retail Price:$134.40 Our Price:$100.80 |
|
Your Source for Heavy Duty Indoor & Outdoor Stair Treads!
