#RST4- 626 Rubber Stair Tread- For Steps With Return Angle

3/16" medium gauge tread tapering to back, 12 1/4" depth; Extra 2" deep nose adjusts and adheres to steps with a return angle between 90 and 60 degrees to give a good fit on stair ways designed for safety or aesthetics. Diamond design tread with extra long 2" depth nosing completely covers pan-filled or molded concrete steps. Makes stairways safer for visually impaired or handicapped. Fine for all but heaviest traveled stairways. Meets Federal Specs. See Specs. Six standard lengths. View Series I & II colors. Call to order Optional Grit Strip design (click to view). Install with No. 400 Neoprene Contact Adhesive, No. 300 Water-based Contact Adhesive or No. 560 Rubber Flooring Adhesive. Use bead of No. 110 Epoxy Stair Caulk inside where nose joins tread. Order installation adhesive below.